MIG200GDSV

Item Number: L13004


Description：
The MIG200GDsv is a dual voltage, compact inverter welder that provides MIG/FCAW, DC Stick, and Lift Arc TIG welding capability.  Incorporating IGBT inverter technology, the MIG200GDsv features performance and high efficiency in a small and powerful package.  With 120V/240V capabilities, this welder can be operated almost anywhere a power outlet is found and can be used with "clean" power generators.  With 240V power, amperage output ranges are 40-200A MIG, 40-200A Stick, and 15-200A TIG, with a 30% duty cycle at full output in each process.   MIG control is synergic, and users can also adjust inductance for more/less weld puddle fluidity.  Simply unplug the 10’ MIG torch, connect the Weldpro SB8 spool gun (sold separately), push a button, and you are ready for Aluminum MIG welding.  MIG and Stick polarity changes are simple as well.  The MIG200GDsv also features Stick arc force adjustment for penetration control and available VRD for safer welding.   A 3 year power source warranty delivers confidence and peace of mind.

Features：
● MIG/FCAW, DC Stick and Lift TIG; welding amperage range of 15 - 200A
● Dual voltage 120V/240V
● Compact and portable IGBT inverter design
● Over-current, over-heating, and low voltage protection
● Digital display provides accurate control of welding output
● Synergic MIG with voltage balance adjustment for fine tuning
● MIG inductance, Stick arc force adjustments
● Metal MIG drive roll system, holds 2 lb or 10 lb wire spools
● Switch to spool gun welding with the push of a button

Package Includes：
● MIG200GDsv welder
● MIG gun NT1 180A 10ft
● TIG torch 17V 12’
● Electrode holder 200A with 10' cable and 35-50 Dinse connector
● Ground clamp 200A with 10' cable and 35-50 Dinse connector
● Power adapter 115/230V
● Flow meter
● Gas hose
● .024”/.035” V-groove drive roller (solid wire)
● .030”/.035” K-groove drive roller (flux core wire)


MIG200GDSV

MIG200GDsv manual