60 AMP Plasma Cutter 220V & 110V – CUT60NH
$865.00
- 20 – 60 Amp output, with 60% at 60 Amp rated duty cycle
- It is an ideal choice for factory maintenance, fabrication work and farm work and auto body repairs
- Cutting through stainless, aluminum, copper, cast iron, carbon steel and all kind of metal as thin as 24-gauge, or as thick as 0.787 in.
- Using any air compressor that puts out 50.7-65.3 psi, you will be able to cut all exotic metals fast, clean, and effectively
- High temp and overload protection with indication
- Dual voltage 115-Volt/230-Volt 10% design
- Blowback/contact pilot arc start, which helps making clean, fast cuts through rusty, painted, or expanded metal. blowback start starts arc without the need of high frequency which can interfere with surrounding
- 2T/4T modes, which is useful when having a long cut to do as it saves work of holding the trigger down the whole time
11 in stock (can be backordered)
Description
The CUT60NH is built on an inverter platform. It is suitable for fabrication work, farm work, auto body repairs and DIY job. Easy starting with blow back pilot arc allows easy cutting of rusty, dirty and painted metals. such as stainless, aluminum, copper, cast iron, carbon steel and all kind of metal as thin as 24-gauge, or as thick as 0.787 in. with any air compressor that puts out 50.7-65.3 psi. Blowback start starts arc without the need of high frequency which can interfere with surrounding electronics. The dual voltage 115-Volt/230-Volt design allows it to be used almost anywhere there is power available (120-Volt restricts total amp output and cutting capacity). Package includes: 1. Cutting torch: PT60 cutting torch, 20 ft., G1/4; 2.Ground Clamp: 7AWGx10 ft. cable 300A ground clamp; 3. Power adapter.
Additional information
| Weight | 52.9 lbs |
|---|---|
| Dimensions | 28.3 × 13 × 24 in |
Anonymous –
So far so good! Well packaged and cuts what I need like a dream. Easy to operate too.